Leprecon LP-2000 Manuel d'utilisateur télécharger pdf (Page 11)

Operating the LP-2000 as a Manual Console

(1) Set all X and Y channel faders, and the PRESET master fader to

zero.

(2) Set both X and Y Crossfaders fully downward, to the Y scene

position.

(3) Bring the MASTER fader up to full. No stage lights should

come on.

(4) Set up the first scene on the X channel faders. The X scene

is currently inactive, so the stage should remain dark.

(5) Push the X and Y Crossfaders up to the X position, and the X

scene should now light the stage.

(6) Set up the next scene on the inactive Y channel faders, while

the X scene is still lighting the stage, then switch to the

Y scene by moving the X and Y Crossfaders to the Y position.

(7) Continue to set up subsequent scenes in this manner, by alternating between

the X and the Y groups.

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 46 47

Pas de commentaire

Leprecon LP-2000 Manuel d'utilisateur Page 11