Leprecon LWS Wireless DMX Manuel d'utilisateur télécharger pdf (Page 4)

Page 4 of 4

To Link a receiver to a specific transmitter:

• Unlink the receiver by pressing and holding the switch until the Link LED turns off.

• Verify that the LED is off.

• Press the Status switch on the TRANSMITTER and hold for one second.

• The Link LED on both the transmitter and receiver will begin to blink.

• The RECEIVER status LED will stop flashing and remain lighted to indicate that it is now linked

to the transmitter.

To unlink ALL dimmers from a transmitter:

• Press and hold the Status switch on the TRANSMITTER for four seconds.

• The Link LED’s of all dimmers previously linked to that transmitter will turn off.

Transmitter Link LED indications:

• ON – Normal DMX link operation

• Fast blink – Linking all available receivers

• Slow blink – Unlinking all receivers

1 2 3 4

Pas de commentaire

Leprecon LWS Wireless DMX Manuel d'utilisateur Page 4