Leprecon W-DMX G4 MK I Manuel d'utilisateur télécharger pdf (Page 9)

4 BlackBox and WhiteBox F-1

16 W-DMX G4(S) User Manual, edition 2 2013-10

Name

LED signal

Description

RX mode:

• Off: Unit is not linked to any transmitter.

• On: Unit is linked to transmitter.

• Rapid Flashing: Transmitters are being searched or

linked transmitter is lost.

• Off: Unit is in G3 mode.

• On: Unit is in G4 or G4S 2.4 GHz mode.

G4/G4S is indicated by red SIGNAL LED on the unit.

• Flashing: Unit in G4S 5.8 GHz mode

SIGNAL

TX mode:

• Off: Unit is in G4S mode.

• On: Unit is in G4 mode.

RX mode: Part of signal strength

PWR

Power on / off

• On: Unit is in RX (receiver) mode.

• Flashing: Receiver is in repeater mode.

DATA

Data is available at the input / output.

RDM

WhiteBox: included, BlackBox: optional

• Off: No RDM data is available on output.

• On: RDM data is available on output (RDM Downstream

activated).

CTRL

• Off: Normal operation.

• On: Switch between normal operation (CTRL LED off)

and CTRL mode (flashing).

• Flashing: CTRL mode is active

To set the frequency band, see chapter "4.8 Switching

CTRL modes", page 23.

5.8GHz is not available in all countries. For more info please contact

Wireless Solution (see page 2).

4.4 Installing the unit

4.4.1 BlackBox F-1

1. Choose one of the following options to make the DMX connection:

– Connect the DMX source to the XLR 5 pin DMX IN port, XLR 3 pin DMX

IN port (BlackBox MK II only) or to the RJ 45 DMX IN port (BlackBox

MK I only).

– Connect the DMX fixture to the XLR 5 pin DMX OUT port, XLR 3 pin

OUT port (BlackBox MK II only) or the RJ 45 DMX OUT port (BlackBox

MK I only).

4 BlackBox and WhiteBox F-1

2013-10 W-DMX G4(S) User Manual, edition 2 17

– Unit with optional Ethernet lighting protocol support:

Connect the Ethernet lighting source or output to the Ethernet in port.

2. Attach the supplied standard antenna(s) and standard adapter(s) or other

suitable antenna(s) / adapter(s) available from Wireless Solution to the

matching connector(s).

Warning

Risk of death by electrocution!

AC power connection must be carried out correctly.

• Make sure that only a qualified and trained electrician

carries out AC power connection.

• Make sure the correct Schuko connector or other

connector suitable for your country is used.

3. Choose one of the following options to connect the power to the unit:

– Attach a suitable mains plug to the supplied power cord and connect the

power supply to the AC power input.

– Connect the power supply to the DC power input.

4. If required, attach the unit to the supplied mounting brackets or other

mounting hardware available from Wireless Solution.

4.4.2 WhiteBox F-1

Fig. 6: Housing of the WhiteBox models

2014-03 W-DMX G4(S) User Manual, edition 32014-03

W-DMX G4(S) User Manual, edition 3

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 28 29

Commentaires sur ces manuels

Pas de commentaire

Leprecon W-DMX G4 MK I Manuel d'utilisateur Page 9

Commentaires sur ces manuels

Produits connexes et manuels pour Éclairage Leprecon W-DMX G4 MK I