Leprecon LPC V2 User's Manual Manuel d'utilisateur télécharger pdf (Page 114)

LPC 48 / 96 Users Manual

Page

114

12 Wireless DMX option

12.1 Wireless DMX Properties

LPC models are available with optional wireless DMX capability, using W-DMX

compatible format. The LPC supports 2 DMX universes, however, only Universe

A will be transmitted via Wireless DMX.

The wireless transmitter has a simple interface with one LED and one

momentary function switch, (See Figure 37).

The LED shows the current state of the wireless DMX link:

 ON – Normal DMX link operation

 Fast blink – Linking all available receivers

 Slow blink – Unlinking all receivers



To set up a Wireless DMX System:

1. Power on only the receiver units to be used with the LPC DMX universe -

ensure that they are not linked with any other transmitter (Receiver LINK

indicators should be OFF).

2. On the transmitter unit, press and release the FUNCTION switch. The

transmitter will scan for all unlinked receivers for a period of ten seconds.

The LINK indicator will flash rapidly.

If successful, each receiver’s LINK indicator will go ON. If any fail, check that the

receiver is in range and repeat procedure.

1 2 ... 109 110 111 112 113 114 115 116 117 118 119 120 121 122

Pas de commentaire

Leprecon LPC V2 User's Manual Manuel d'utilisateur Page 114